×
Do You Need To File An Insurance Claim
Do You Need To File An Insurance Claim
Commercial & Residential / TPO Roof Repair
Built layer by layer for Gulf Coast weather.
TPO’s heat-welded seams and reflective surface make it one of the best low-slope membranes available — but seam failures, punctures, flashing pull-aways, and ponding issues do develop over time. Most can be repaired with a hot-air welder without a full tear-off. Our crews find the real source of the problem and restore your TPO system correctly — backed by a workmanship warranty and honest, upfront pricing.
Fast, free, and no obligation.
Common TPO roof repair problems, identified
Roof Repair
TPO is durable and efficient, but heat-welded seams, membrane edges, and flashings do develop weak points over time. Here are the most common issues our crews repair.
Improperly welded or aged seams are the most common TPO failure point. When a seam opens, water gets under the membrane and reaches the insulation immediately.
Foot traffic, rooftop equipment, or storm debris can puncture TPO membrane. We heat-weld compatible TPO patches directly over the damaged area.
TPO flashing detail strips at parapet walls and pipe boots can lift or crack, especially around penetrations where thermal movement is greatest.
TPO leaks often travel under the membrane far from where water appears inside. We locate the real entry point before applying heat to any part of the system.
Thermal cycling can cause TPO membrane to shrink over time, pulling lap edges away from the substrate and opening a gap along the seam line.
Ponding accelerates UV degradation of TPO and stresses seams with added weight. We clear drains, repair drain collars, and address low spots that prevent proper flow.
Why Repair First
Heat-welding a patch or re-welding a seam costs a fraction of a full TPO tear-off — and can add years to an otherwise sound membrane system.
Most TPO repairs — seam re-welds, patches, flashing, drain collars — are completed in a single visit with a hot-air welder on the truck.
We use the same TPO membrane material and heat-weld patches directly to the existing field membrane — no adhesives that fail in heat, just a proper welded bond.
If seam failures or UV damage are system-wide, we’ll tell you honestly — with a clear explanation of why repair no longer makes economic sense.
Our Repair Process
Every TPO roof repair follows the same five-step process, so you always know what’s happening and why.
We walk every seam, lap edge, flashing, and drain on the membrane surface to locate the real entry point — not just where water appears inside.
A clear, itemized estimate covering seam re-welds, membrane patches, flashing, or drain collar repairs — no surprises.
If wind, hail, or storm damage caused the problem, we document everything and work directly with your adjuster to support the claim.
We heat-weld patches and seam re-welds directly to the existing membrane, replace flashings, and restore drain collars — leaving sound membrane undisturbed.
We probe every weld edge, patch perimeter, and flashing termination before leaving — and confirm the repair is fully heat-bonded and watertight.
Repair Services
From seam re-welds to full patch installations, here are the most common repairs our crews perform on TPO single-ply membrane roofs.
We clean, prepare, and heat-weld failed or lifting seams back together with a hot-air welder — restoring the factory-grade bond across the full lap width.
For punctures, tears, or damaged sections, we cut out the affected area, heat-weld a compatible TPO patch, and probe every edge to confirm a complete bond.
We replace failed pipe boots, re-weld parapet flashing details, and install new drain collars — heat-welded to the field membrane for a seamless transition.
Why Trust Us
TPO repair requires the right equipment and technique. We’ve built our reputation on finding the real leak source and repairs that hold — across Mississippi, Alabama, and Georgia.
Top 3% of roofing contractors nationwide — held to a higher standard on every job, big or small.
We understand how heat-welded single-ply systems fail at the seam and flashing level — so we find the real source before we weld anything.
Our TPO repair work carries a workmanship warranty — so if the same seam or patch fails, we come back and make it right.
A local crew that shows up when we say we will, not a franchise dispatcher routing work from out of state.
Financing Available
Even a targeted repair can be an unexpected expense. Our team works with flexible financing options so cost doesn’t delay a repair and let a small seam failure become a full membrane replacement.
“We had a seam leak on our TPO roof that two other contractors couldn’t find. B&A walked the whole field, found a lifting lap under a rooftop unit, re-welded it on the spot, and it’s been bone-dry through two storm seasons.”
— A B&A Roofing Customer, Hattiesburg, MS
Get Started Today
Fast, free, and no obligation. Tell us what’s happening and one of our local TPO membrane specialists will follow up to schedule your inspection — often the same day.
By submitting, you allow B&A Roofing to contact you by phone, email, or text. You can opt out at any time. We never share your information with third parties.
A local B&A Roofing expert will reach out shortly to schedule your free TPO roof repair inspection.
Don’t see your location? Call us! We Likelt serve your area too